You will have to issue this command via SSH (or type in terminal) each time you want to wake up the PC. This method requires sudo, but allows you to specify the interface, which is what we need. The command to wake your PC up is: sudo etherwake -i eth0 AA:BB:CC:DD:EE:FF (click on the details of that connection to reveal the IP and MAC listed as AA:BB:CC:DD:EE:FF in the example ). Once this is installed, you have to go to the PC and note the MAC address of the LAN adapter the RPI is connected to. The best way to do this is to use the etherwake: sudo apt-get install etherwake This is important because we have to force the Magic Packet to go through the eth0 instead of WIFI. If you configured the RPI in the same way as in the Guide 2 (see step 2) your microcomputer will have a link via LAN with the computer but will use the WIFI to connect to the internet. Feel free to connect via Facebook, Twitter or Google+ Love the sound of this setup? Follow the for more. a PC which has a LAN port with Wake On Lan support (most of them).a Raspberry Pi with the ethernet port and WIFI connectivity.When the Magic Packet is received by the PC via LAN cable, it wakes up. The RPI is constantly awake and is able to receive a request to wake the PC through the LAN interface. If your PC is connected to the internet via WIFI, and the card does not support Wake on LAN, you have no other options of waking up the PC remotely. Running a LAN cable may not always be a feasible solution. You can wake up the PC within seconds when needed, saving a lot of power in the process. This means you no longer have to keep your PC on, to access the files remotely. It can be done on the local network as well as from the internet. You can wake up any PC linked to the Raspberry Pi remotely. The Raspbian image has changed, and the old version is no longer valid. You can get this networking information using the ipconfig command (see the above link to learn more).First of all, this is an updated revision of my previous tutorial. Also, it is a good idea to double-check that you are using the target computer's correct MAC and IP address. If you suspect a networking issue, use the ping command to confirm the source can contact the target device. When using this feature, you may also encounter networking problems that may prevent the device from waking up. On a laptop, you must ensure the device is connected to a power outlet. If you use an Ethernet connection, confirm the lights on the card are still blinking after the device is powered down. The ability to turn on a device remotely only works if the network adapter is active and reachable. You may need to disable fast startup to allow the feature to work. If you use a USB to Ethernet adapter, WoL may only work when the computer is sleeping since powering off the device may also stop providing power to the USB port. If the option is unavailable in the motherboard's BIOS or UEFI or the network adapter (for example, USB to Ethernet adapter), you won't be able to use the feature. The system must support Wake on LAN at the firmware level. If the device does not wake up with these instructions, you can perform a few things to troubleshoot the problem. How to troubleshoot Wake on LAN feature on Windows 10 Once you complete the steps, you can use the addresses with the utility of your choice to wake up a remote computer. If you use Command Prompt, you can query the adapter addresses using the ipconfig /all command. Click the download link to save the app on your device.Warning: Although the app works as advertised, it's a third-party tool, and you should use it only at your own risk. Or you can use third-party tools to send the magic packet to wake up the device.įor the purpose of this guide, we'll use the "WakeMeOnLan" tool from NirSoft to wake a device remotely: You may be able to find scripts that you can use with PowerShell. For instance, you can use the WoL tool built into the router. Once the feature has been configured, you can turn on the computer in multiple ways. How to wake up a computer remotely on Windows 10 In addition to disabling the feature, you may also want to turn off the WoL feature inside the device firmware using your manufacturer's instructions. 9, make sure to select the Disabled option. If you don't want to use the feature, you can use the same instructions outlined above to disable Wake on LAN, but on step No. After you complete the steps, the device will be ready for the remote magic packet using a third-party tool.
0 Comments
Leave a Reply. |